Lorex Technology LH010 Manual de usuario descargar pdf (Pagina 24)

Basic Setup

Connecting BNC Cameras to your DVR

1 Connect the male power connector on the BNC extension cable to the female power

connector on the camera.

• Connect the BNC connector to the camera.

2 Co

nnect the female power connector on the BNC extension cable to the power adapter.

3 Co

nnect the BNC connector to one of the Video Input ports on the rear panel of the DVR.

4 Plug the camera power adapter to a power outlet.

Connecting and Removing BNC Cables

BNC (Bayonet Nut Connector) is a special connector that locks on to the system port and

cannot be accidently removed.

To connect or remove a BNC connector:

• Push the BNC connector firmly into the BNC port and simultaneously twist the connector

ockwise to tighten.

• To remove a BNC connector from a BNC port, push and simultaneously twist the connector

ounter-clockwise to loosen the BNC connector.

BNC Extension cable

Female power connector

Digital Video

Recorder

(8-channel model shown)

Male power connector

BNC

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 127 128

Sin comentarios

Lorex Technology LH010 Manual de usuario Pagina 24