Lorex Technology L15D400 Manual de usuario descargar pdf (Pagina 40)

EXTERNAL DEVICE

1. TCP/IP SETUP - Configure the system Networking

information.

2. PAN/TILT SETUP - Set up the parameters of the

PTZ control.

3. SPOT SETUP - SPOT output setup.

4. RS232C SETUP - Set up the parameters of the

RS232 port.

TCP/IP SETUP - IP SETUP

1. MAC ADDRESS - Displays the MAC address.

MAC address cannot be changed and is unique to

each system.

2. DHCP MODE - Set the DHCP mode to Manual or

Automatic.

• When DHCP is set to Automatic, the settings

will be retrieved from the network router - and

settings cannot be changed manually.

• To turn off the DHCP automatic detection, set

the DHCP MODE to DISABLE.

3. IP PORT - Manually Enter an IP Port number. The

default port is 50000

4. IP ADDRESS - Manually set the IP address.

5. GATEWAY - Manually set the GATEWAY.

6. SUBNET - Manually set the SUBNET MASK.

TCP/IP SETUP - DDNS SETUP

1. DDNS ENABLE - Turns the DDNS Function ON/

OFF.

2. DNS SERVER - Enter the DNS Server’s IP

address. Use Mouse Wheel to change the value.

The default IP is 202.133.244.128

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 55 56

Sin comentarios

Lorex Technology L15D400 Manual de usuario Pagina 40