Lorex Technology SG21FD3044-161 Manual de usuario

21” FLAT SCREEN CRT / DVR OBSERVATION SYSTEM WITH 4 NIGHT VISION CAMERAS Instruction Manual English Version1.0 MOD

5 4 GETTING STARTED 1 Connect the AC Power Cord to the AC Input of the 21” Flat Screen CRT / DVR Combo and plug into an electrical outlet. Connec

6 After the unit has completed its internal diagnostic test, the network information will be displayed (for a short period of time). (See below)

7 REC STOPWTMKRECPOWERHDDFULLTIMER ALARMPLAY RECUSBSTAND-BYALRSEVENTSEARCH COPY PAN/TILTQ1/Q2 SEQ PIP/POPMENUVOLUME A-SELTALKCH8CH7CH6CH5CH4CH3CH2

8 2 QUAD BUTTON Pressing this button goes to Quad viewing mode, either Page A (Q1) or Page B (Q2). 3 SEQ BUTTON Used to automatically sequence be

9 By pressing and holding this button the user has the ability to talk to a specific camera location. This button must be pressed the entire time

10 13 REW BUTTON Press this button to begin high-speed reverse playback during the playback. 14 PLAY / PAUSE BUTTON a) Initiates video Playbac

11 e) HDD FULL: If the OVERWRITE menu is set up, the LED will not blink in any case. The LED blinks if the HDD has less than 1GB of storage spac

12 6 DESCRIPTION OF PARTS AND FUNCTION – BACK PANEL 1 BNC Camera Inputs - Channel 1-8 camera inputs (for cameras with BNC Video outputs) 2 6

13 7 MAIN MENU CONTROL MAIN KEY BUZZER LOSS BUZZER 6.SYSTEM (Ⅰ) QUAD LINE BLANK COLOR TITLE/TIME ALARM OUT D

14 ALARM RECREC QUALITYREC SPEEDREC DURATION9.ALARM REC SETPRE ALARM RECSCHEDULE RECREC SETTTING10.SCHEDULE REC SETHDD CLEAR ALL8.HDD / REC SETREC

I CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABL

15 Enter the MENU screen by pressing the MENU button. Scroll through the 12 options by pressing the UP and DOWN buttons. To enter a sub-menu, pre

16 NOTE: Some alternative brand PIR motion sensors have a default setting of N.C (normally closed). In order to activate the alarm on such a PIR

17 h) DEFAULT SET : Selecting [Y] resets all programmed settings back to the default factory settings (except for the time & date). NOTE: I

18 a) REC QUALITY : Sets the quality level of recording. Available settings are : Basic, Normal, High and Best. NOTE: Higher quality recording

19 [ONCE] - Recording will be carried out one time, according to the schedule. b) N0-N7 : Total 8 REC can be set up from N0 to N7. Each Sc

20 d) USER PASSWORD : Put the Password that you have set with the DDNS server. As the maximum character available with this unit will be 8 digit

21 8 PLAYBACK SEARCH The DVR/MONITOR allows you to easily find sections of recorded video using the Search feature. Press the SEARCH button to ac

22 9 PLAYBACK OPTION When the PLAY button is pressed, one of the Playback Search menus will appear. The Playback menu that appears upon pressing

23 10 PAN/TILT ZOOM The DVR/MONITOR is equipped with a built-in Pan/Tilt Zoom feature, which is only available when used in conjunction with a com

24 11 REMOTE CONTROL Features of the Remote Control. For more details on specific remote control features, refer to the Monitor features KEY FUNC

II NOTE: This equipment has been certified and found to comply with the limits regulated by FCC, EMC and LVD. Therefore, it is designed to provide

25 12 CAMERA (DIN Connector) INSTALLATION Connect the camera to the CAMERA INPUT on the rear panel of the system. SG7380 PAN/TILT CAMERA (CH1 ON

26 13 CAMERA (BNC Connection) INSTALLATION Connect the camera to the CAMERA INPUT on the rear panel of the system. BNC CAMERA +DC 12V-VIDEOAU

27 14 MONITOR AND STANDARD VCR INSTALLATION Connect the camera to the CAMERA INPUT on the rear panel of the system

28 15 ETHERNET (NETWORK), EXTERNAL ALARM DEVICE INSTALLATION SENSOR INTERNET ALARM OUTVIDEO INPUTCH3CH1CH2 CH4CH2 CH4CH5CH6CH651

29 16 NETWORK IMAGE SIZE AND SPEED 720 X 240 360 X 240 IMAGE SIZE IPS IMAGE SIZE IPS BASIC 16K ~ 17K 10 ~ 15 10K ~ 11K 23 ~ 28 NORMAL 1

30 17 RECORDING TIME (IN HOURS) BASED ON 160 GB H.D.D. 720 X 240 BASIC NORMAL HIGH BEST 01 IPS 2858 2500 2052 1510 02 IPS 1428 1250 1026 758 03

31 18 RECORDING TIME (IN GIGABYTES PER HOUR) 720 X 240 BASIC NORMAL HIGH BEST 01 IPS 0.056GB/H 0.064GB/H 0.078GB/H 0.106GB/H 02 IPS 0.112GB/

32 19 INSTALLING THE HDD NOTE: The HDD serves the same purpose in the DVR/Monitor as a video cassette does in a VCR. However, installing the HDD

33 NOTE: The 4 Pin connection is the DC Power cable, and the wider cable is the standard Hard Drive IDE type connection 4 Secure the HDD in th

34 8 If you need to unlock the cabinet, turn the key counter-clockwise from the position shown above. IF YOU DO NOT LOCK THE CABINET, THE DVR/M

III CONTENTS 1 GENERAL PRECAUTIONS ...1 2 CAUTIONS AND FEATURES ...

35 20 TECHNICAL SPECIFICATIONS DVR Recording Speed : 60 Fields / Sec. HDD Capacity : 400GB (Max.) Recording Video Quality : Basic, Normal, High,

36 21 TROUBLESHOOTING If the system does not function properly, please check the following points. PROBLEM REMEDY Too dark or bright picture R

37 22 CARE AND MAINTENANCE Please follow these instructions to ensure proper care and maintenance of this system Keep your monitor and camera dr

It’s all on the web  Product Information  User Manuals  Quick Start Guides  Specification Sheets  Software Upgrades  Firmware Upgrades www.

IV 17 RECORDING TIME (IN HOURS)...30 18 RECORDING TIME (IN GIGABYTES PER HOUR)

1 1 GENERAL PRECAUTIONS 1. Read Instructions: All of the safety and operating instructions should be read and understood before the product is u

2 CAUTIONS & FEATURES: 2.1 FEATURES MONITOR • Picture Tube: 21” Flat Color CRT • Horizontal Resolution: More than 480 Lines • Camera capabl

3 2.2 CAUTIONS 1 All the warnings and instructions of this manual should be followed 2 Remove the plug from the outlet before cleaning. Do not

4 3 SYSTEM INCLUDES 21” Flat Screen CRT/DVR Combo NOTE: CHECK YOUR PACKAGE TO MAKE SURE THAT