Lorex Technology SG21FD3044-161 Manual de usuario descargar pdf (Pagina 20)

Enter the MENU screen by pressing the MENU button. Scroll through the 12 options by pressing

the UP and DOWN buttons. To enter a sub-menu, press the Enter button where the highlighted

scroll bar is located. To exit the Main Menu, scroll down to the Exit option and press the Enter

button.

NOTE: In sub menu of the Main Menu, you can exit the Menu mode by selecting Exit, or you

can return to the Main Menu by selecting Return.

NOTE: The Menu is exited automatically after 60 sec of inactivity.

7.1 TIME / DATE SET

This submenu allows you to change the Time and Date displayed on the monitor, and also

program the information you’d like to appear in the On-Screen Display.

a) DISPLAY : Selecting [Y] enables on screen display of the date & time. Selecting [N]

hides this information.

b) TIME : Change the time (24 hour clock)

c) DATE : Change the date.

d) DATE FORMAT : There are three formats to display the date:

MM / DD / YYYY : for U.S.A.

YYYY / MM / DD : for Asian countries.

DD / MM / YYYY : for European countries.

7.2 SEQUENCE SET

This submenu allows you to select how long you’d like each channel to appear on-screen

before automatically switching to the next channel in Sequence mode. The Dwell Time is

0-59 seconds selectable for each of the 8 channels and for Quad A / QUAD B mode.

NOTE: Channels without a camera, a Video Loss, or a Dwell Time of zero will be

skipped in sequencing.

7.3 TITLE SET

This submenu allows you to change the title of each camera location (up to 8 characters), or

remove the titles from the on-screen display.

a) DISPLAY : Selecting [Y] will enable the camera titles to appear in the on-screen display.

Selecting [N] will remove all titles from appearing in the on-screen display.

b) CH 1 - 8 : Change the titles of each individual camera.

7.4 ALARM SET

This submenu allows you to enable / disable the camera’s PIR Alarm function by channel.

a) ALARM : Selecting [OFF] disables PIR motion detection from triggering any alarm.

Selecting [OSD] will allow alarms to be triggered, and the letters “AL” will appear on the

screen of the camera location where the alarm is taking place. A third option,

[OSD+BUZZER] will both display “AL” and emit a buzzer sound in the event of an alarm.

b) CH 1-8 : Set the length of alarm time for each channel between 1~59 seconds.

Additionally, you can select the Alarm Input. The default setting is OFF - to activate the

Alarm on a camera, change the setting to N/O (Normally Open), N/C (Normally Close).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 42 43

Sin comentarios

Lorex Technology SG21FD3044-161 Manual de usuario Pagina 20